9
9
TECHNICAL SPECIFICATIONS
Bend Length
120” (3048mm)
Bend Material Thickness
10ga. (3.41mm) mild steel*
12ga. (2.65mm) stainless steel**
Bend Angle
0 – 135 degrees
Beam Adjustment
1” (25.4mm)
Minimum Reverse Bend
.984” (25mm)
Box Depth
6” (152mm)
Finger Size
6 @ 3” (76mm)
4 @ 4” (102mm)
10 @ 5” (127mm)
6 @ 6” (152mm)
Floor Stand
2 pcs. Welded Steel
Hydraulic System Motor
5hp (3.72kw) 220V / 3Ph / 60Hz / 15A
Power Requirements
220V / 3Ph / 60Hz
Hydraulic Reservoir
18 gallons (68.13liters)
Shipping Dimensions (L x W x H)
153” x 46” x 71” (3886 x 1168 x 1803mm)
Shipping Weight
7700 lbs. (3500 kg)
Based on a material tensile strength of *64000 PSI – mild steel
**100000 PSI – stainless steel
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
[email protected], Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
