21
21
CONTROL FUNCTIONS
POWER – Lights white when the power is
supplied.
PUMP START – Push to energize the hydraulic
system.
BEND INCH – Select for jogging motion of the
bending leaf.
BEND AUTO – Select when a bending cycle is
desired.
BEND – Pushing the joystick to the bend position
raises the bending leaf to the preset angle. (Jogs
in inch mode, cycles in auto mode)
RELEASE – Pushing the joystick to the release
position lowers the bending leaf. (Jogs in inch
mode)
Note: The bending leaf “I” will not come
up until the clamping beam “H” is completely
down.
Footswitch Functions
(Hydraulic pump must be running)
DOWN – Pressing the down pedal will bring the
clamping beam down.
CAUTION: Keep hands
and fingers clear.
UP – Pressing the up pedal will raise the clamping
beam.
DOWN
UP
figure 8
figure 7
