12
4.
Remove unit from pipe.
5.
Carefully relocate heater coil to next
desired weld location and repeat the start
up procedure.
6.
When finished with the unit store in a dry
protected location.
6. Servicing
Clean outside casing with dry cloth.
Note -
use anti splatter spray or paste on
outside shell of Hot Coils
®
to avoid splatter
sticking to stainless
Clean inside surface with dry cloth.
Inspect for any damage before and after each
use. Report any damage to your safety
representative or supervisor for immediate
removal from service.
Hot Coil
®
should be
returned to an authorized servicing dealer
7. Replacement Parts
Latch pins and decals are available from an
authorized
Hot Coils
®
Dealer.
WARNING
Damage to internal diameter
ceramics may expose bare
wire and cause an electrical
short.
Shock
Risk
