23
for detailed instructions regarding firmware upgrades.
3.
Set the Network Timing Protocol (NTP).
CloudCore Configuration & Network Administration Guide
3.7.2 Upgrade Firmware
To ensure you are using the most recent software version before configuring the eNB, follow the
steps below.
3.7.2.1
Upgrade Firmware from the eNB GUI
1.
Download the most recent firmware file from Baicells.com > Support >
, and save
on local computer.
2.
Go to
System > Upgrade
, and select whether to preserve the current settings.
3.
Select
Choose File
, and navigate to the firmware file saved on local computer.
NOTE: The file type is *.IMG
4.
Click
Upgrade
.
5.
In the pop-up window click
PROCEED
.
6.
The base station reboots after approximately three minutes.
7.
On the
Basic Setting > Basic Info
page, the upgraded version is displayed in
Software
Version.
3.7.2.2
Upgrade Firmware from the OMC
1.
Go to
eNB > Upgrade > Upgrade&Rollback
.
2.
Select the correct
Product Type
from the list.
3.
Select the checkbox next to the eNB(s) you want to upgrade.
4.
In the
New Task
window, select the
Upgrade Type
.
5.
In the eNB section, select the checkbox(es) next to the eNB(s) you want to upgrade.
6.
Next to
File List
, select/deselect
Retain Configuration
. Under
Select
, choose the software
version by clicking in the empty cell (a blue checkmark will appear).
7.
Choose the
Execute Type
, which determines when the upgrade will occur.
8.
Select
OK
.
