3
Identity
Color
Status
Description
Slow flash: 1s on,1s off
CELL2 is in activated.
ALM
Red
Steady On
Hardware alarm
OFF
No alarm
Technical Specification
1.4
1.4.1 Hardware Specification
Item
Description
LTE Mode
LTE TDD
LTE Frequency
Band48, and partial band42,band43
Channel Bandwidth
5MHz, 10MHz, 15MHz, 20MHz per carrier
Output Power
24 dBm per antenna
Receive Sensitivity
-100 dBm
Synchronization
GPS
Backhaul
1 RJ-45 Ethernet interface (1 FE/GE)
MIMO
DL 2 x 2 on each carrier, 2 carriers
Dimension
309mm(H) x 227mm(W) x 104mm(D)
Installation Type
Pole or wall mount
Antenna Type
Built-in 4 high-gain LTE antennas
Horizontal Beamwidth 65±10°
Vertical Beamwidth 17°
Polarization: ±45°
Antenna Gain
13.5 ± 0.8 dB
Power Consumption
Typical 20W, MAX 25W
Power Supply
PoE++, comply with IEEE 802.3bt standard
Weight
4.85kgs
MTBF
≥ 150000 hours
MTTR
≤ 1 hour
NOTE
: The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on
5MHz bandwidth,
FRC A1-3 in Annex A.1 (QPSK, R=1/3, 25RB) standard.
1.4.2 Global Part Numbers
Model No.
Description
pBS3101S
Band48, 10MHz, 20MHz per carrier,
DL 2 x 2 on each
carrier, 2 carriers
, Built-in
antenna.
