Nova-436 Outdoor LTE TDD Base Station Installation Guide
9
Installation Environment
2.3
2.3.1 Locational Requirements
Environments with high-temperatures, harmful gases, unstable voltages, volatile
vibrations, loud noises, flames, explosives, and electromagnetic interference (large radar
stations, transmitting stations, transformer substations) are not suitable for the operation
of Nova-436, and thus should be avoided.
Places prone to have impounded water, soaking, leakage, or condensation, should also
be avoided.
Factors like climate, hydrology, geology, earthquake, electric power, and transportation
should be taken into consideration in the construction process so that a proper location
can be chosen to meet the communication engineering environmental requirements, as
well as the technical requirements of network planning and communication equipment.
2.3.2 Environmental Requirements
Table 2-2 gives the base s
tation’s environmental requirements with regards to
temperature, humidity, and voltage.
Table 2-2 Environmental Requirements of the Base Station
Item
Range
Typical value
Humidity
-40°C ~ 55°C
25°C
Relative humidity (no condensation) 0% ~ 100%
5% ~ 95%
Safety voltage
42V ~ 58V
48V
Personnel Requirements
2.4
The installation personnel must master the basic safe operation knowledge, through the
training, and having the corresponding qualifications.
Against Lightening and Grounding Protection
2.5
CAUTION
:
It is unlikely to happen but since the LTE base station is very sophisticated
equipment so we would recommend you to test it on the ground to make sure
everything is functioning before install on the tower.
