Choose your type of machine
!
Important:
The calculation formula for selecting the type of steam engine is for
reference only. Due to the variability of the building, the specifications and size
illustration are used as guidelines only. If we have complete information, including actual
blueprint, project instruction and building details, we can select the type of machine
once again. Otherwise, the manufacturer will not be responsible for the selection of
the type of machine.
Measure the length, width and height (foot) of the current steam shower or bathtub room.
Example;
L:7xW:5xH:8 = 280 Cubic Feet
You would need Model s-900 (it is that simple)
However, if you shower materials are;
A:Natural Stone(Granite or Marble etc.)
ADD
75%
B:Exterior walls
ADD
75%
C:Celia Heights exceeding 8 FT.
ADD
75%
D:Ceramic tile
ADD
75%
E:Glass (2 walls)
ADD
75%
!
1. Wait for the completion of automatic water discharge after each time of using the steam
engine to make sure the water in the tank is discharged completely before cutting off
power supply.
2. There should not be any leakage or damage among the steam engine, steam nozzle,
components and pipes. They should be checked and repaired annually.
3. Clean the water supply pipes of the steam engine once a year.
4. Check all the connections, faucets and connection terminal to see whether they become
loose or are damaged due to overheat.
5. Check the furring accumulated in the water tank and electric heating tube. If the
furring is thick, dispose it in time (use diluted lemon acid to soak for 15-30 minutes).
6. Remove the water level sensory needle once a quarter to clean the furring in the needle.
Maintenance of the steam engine
Important:
Perform water discharge operation after each use.
GEN3-1
