Bagela
Bagela
Bagela
Bagela
asphalt recycler
asphalt recycler
asphalt recycler
asphalt recycler
BA 7000F / BA 10000
BA 7000F / BA 10000
BA 7000F / BA 10000
BA 7000F / BA 10000
7
5
Procedure for reprocessing milling asphalt (asphalt fines)
(differs from procedure for reprocessing broken-up asphalt lumps)
5.1
Setting up of the recycler
With the aid of the spirit level at the chassis, level out the recycler by turning the forward
propping jacks into such a position that the discharge end is slightly raised above the
horizontal (half a bubble in the spirit level).
5.2 Charging
Attention:
Charge only asphalt fines which have been stored in a dry place!
-
Charge the recycler continually to keep the contents at a constant level corresponding to
about 60 bar on the hydraulic pressure gauge.
DO NOT OVERFILL THE RECYCLER TO AVOID EXCESSIVE SMOKE EMISSION.
5.3 Discharging
-
Open discharge gate half-way.
-
Discharge the reprocessed asphalt continuously at a ratio equal to the charging rate.
-
If the temperature of the tumbler contents rises above normal, open the discharge gate a
little more and lower the discharge end by means of propping jacks.
-
If the temperature falls, close the discharge gate further and raise the discharge end.
