12
2.3 Display Installation (DP C10.UART)
Rubber clamping ring
Left and right display
clamps for the φ22.2
handlebar:
Left and right display
clamps for the φ25.4
handlebar:
One or two rubber clamping rings may be needed depending on the diameter of the handlebar (the applicable
handlebar specicatons are φ22.2, φ25.4 and φ31.8).
Open the left or right display clamp, and insert one or two clamping rings into the right position of the display
clamp as shown in the picture above.
Insert the clamping ring(s) to each of the two display clamps and mount them onto the handlebar. Use an interanl hex
wrench to fasten the left and right clamps onto the handlebar.
display clamp
C
hex socket head cap
screws M4×8
→
A
A
B
B
C
C
DEALER MANUAL
HD DRIVE SYSTEM
SYSTEM INSTALLATION