52
battery will flash for 4 seconds, indicating that
maintenance is necessary.
r
The maintenance alert function can be disa-
bled: settings maintenance alert (MA)
aintenance alert (MA) 0. (Maintenance alert
can also be set via a computer. This requires a
USB connection. See also the parameter sett-
ing instructions).
6.5.9
Further Settings:
Password Setting
When the speed field displays PSd, it is a prompt to
enter a password. Press
/
to set the four-fi-
gure
password (using digits 0 to 9). Briefly press
to switch between the single digits of the p-
assword. default password is "0512". Briefly press
to switch between the single digits of the passw-
ord.The default password is "0512". Briefly press
to confirm your setting. If the set password is
wrong, the system automatically returns to the p-
revious interface. If the set password is correct, the
system will switch to the setting of the wheel dia-
meter.
6.5.10 Wheel Diameter Selection
When the speed position displays Wd, press
/
to
select the correct wheel diameter: 16/18/20
/ 22/24/26, 700c, 28/29. The measurements are
in inches. A wrong wheel diameter can lead to
After this setting, briefly press
(< 0.3 seconds)
to enter the setting interface of speed limit.
DISPLAY (DP C10.UART)
'($/(5
MANUAL
HD DRIVE SYSTEM
m-
speed anomalies.