4
BF-DM-C-RM G06A2-D-EN July 2022
6.3 DRIVE UNIT INSTALLATION
6.3.1 List of Tools to be Used
Use of the Tools
Tools
To tighten/loosen the M12 flange nuts.
Open spanner
To tighten/loosen the screws onto the disc brake.
Internal hex wrench
6.3.2 Motor Installation
1. First place the disc brake on to the motor
and tighten with six screws.
2. Respectively mount the bushing, hex nut
and stop pin on the flywheel.
3. Insert the motor into the frame and hang
up the chain.
4. Mount stop pins and washers on both sides
of the motor shaft.
5. Tighten clockwise M12 flange nuts with
open spanner at both sides of the motor.
(torque requirement: 47-55 N.m.)
6. Connect motor's cabling.
