BADU Mat R 41, Translation Of Original Operation Manual

Page: 17 / 24

Valve positions
01|2019 EN 5
3 Valve positions
Valve position Function/flow direction in valve
FILTER Swimming pool water is filtered.
PUMP – TO FILTER (top) – THROUGH
THE FILTER (from top to bottom) – FROM
FILTER (bottom) – TANK – SWIMMING
POOL
BACKWASH Cleaning the filter system in reverse flow.
PUMP – FROM FILTER (bottom) –
THROUGH THE FILTER (from bottom to
top) – TO FILTER (top) – LINE – DRAIN
RINSE Clean the filter medium and pipes after
backwashing.
PUMP – TO FILTER (top) – THROUGH
THE FILTER (from top to bottom) – FROM
FILTER (bottom) – LINE – DRAIN
CLOSED No circulation.
Never operate the pump in this position!
WASTE Pool drainage.
PUMP – LINE - DRAIN
CIRCULATE Circulate without filter.
PUMP – TANK - SWIMMING POOL
4 Cleaning the BADU Mat
1. Switch the pump off.
2. If required, close the ball valves in the pipes and drain the
system slightly.
3. Release the 6 or 10 screws on the lid, remove the complete
upper part and clean the BADU Mat.
4. When reassembling, pay attention to the position markings
(the same mounting brackets from the lid and housing must
sit above each other).