17
The menu “3. Display mode” is used to
define the controller’s display for normal
operation.
This display appears whenever two min-
utes go by without any key being pressed.
The main menu appears again when a
key is pressed.
The menu is closed by pressing the “esc”
key or selecting “Exit display mode”.
Display mode
3. Display mode
3.1. Schematic
In graphics mode, the selected hydraulic systems are depicted with the measured
temperatures and operating states of the connected consumers.
3.2. Overview
In overview mode, the measured temperatures and operating states of the connected
consumers are depicted in text form.
3.3. Alternating
In alternating mode the schematic mode and then the overview mode are active for 5
seconds at a time.
When active, the display’s backlight is switched off after 2 minutes of inactivity.
3.4. Sleep mode
Caution
If an error message is waiting, the backlight is not switched off.
Summary of Contents for Logic 2
Page 33: ...Hier folgend weitere FAQ und Hinweise...
Page 72: ......