Badger Power Electronics BPE-HI-SP-3.6K, User Manual, Page: 23 / 32

Badger Power Electronics
2. Set Grid parameters
Step 1 Click each item to enter the Grid
parameters.
Step 2 Click Next .
XXXXXXXX
1 2 3
4
5
Step2 Set parameters for the inverter to connect to the
power grid.
Standard Code
Nominal Voltage(V)
Nominal frequency (Hz)
Date and Time
Next
Previous
Click each item to
enter the information.
3. Set Power Limit parameters .
Step 1 Click each item to enter the Power Limit
parameters .
Step 2 Click Next
.
4. Set the Inverter Work Mode
1 2 3 4 5
Step3 Set parameters for the inverter to connect to the
power limit.
Power control
Meter location
Meter Type
Power flow direction
Digital meter modbus address
Maximum feed in grid power(W)
Next
Previous
Click each item
to enter the
information.
XXXXXXXX
XXXXXXXX
Step 1 Select the prefered work mode and
enable EPS Output if required.
Step 2 Click Next
.
5. Start Inverter
Step 1 Click .
1
2 3 4 5
Step4 Set parameters for the inverter to connect to the
workmode.
Hybrid work mode
Battery type selection
EPS Output
Next
Previous
Click each item
to enter the
information.
1 2 3 4
5
Step5 Please click the button below to start the inverter.
Previous
Click it to start.
XXXXXXXX
23