Rubber nut
RJ45
terminals
Threaded
sleeve
BMS cable
Waterproof cover
Seal
Inverter
side
Don’t cut off any
communication cables.
Unscrew the waterproof cover
and loosen the rubber nut on
waterproof cover.
Make the RJ45 terminal according to above function description of each Pin definition.
Lead the BMS cable through the rubber nut, seal and waterproof cover in turn.
Press the BMS cable in the seal
via the side incisions.
cc
Lithium
Battery
Insert RJ45 terminals into corresponding ports.
Screw the waterproof cover back to inverter firmly
with 4 x M4 screws(1.2N.m).
Install the seal into the threaded sleeve, fasten the
rubber nut.
1
2
3
1
3
2
Badger Power Electronics
DRMs Connectio
n
DRMs is a shortened form for “inverter demand response modes”. It is a compulsory requirement for inverters in Australia.
DRMs
Control Module
Rubber nut
RJ45
terminals
Threaded
sleeve
DRMs cable
Waterproof cover
Seal
Inverter
side
Don’t cut off any
communication cables.
Unscrew the waterproof cover
and loosen the rubber nut on
waterproof cover.
Make the RJ45 terminal according to above function description of each Pin definition.
Lead the BMS cable through the rubber nut, seal and waterproof cover in turn.
Press the DRMs cable in the seal
via the side incisions.
cc
2
1
Insert RJ45 terminals into corresponding ports.
Screw the waterproof cover back to inverter firmly
with 4 x M4 screws(1.2N.m).
Install the seal into the threaded sleeve, fasten the
rubber nut.
1
2
3
3
11