PROGRAMMING
To program Badger Meter SDI Series sensors, install the Data Industrial programming software on a computer and enter data
in the templates of the Windows
®
based program following these steps .
1 . Load the interface software onto the computer .
2 . Connect the PC to the SDI with the ASDIB-20 SDI programming kit . Plug in the RJ11 plug from the ASDIB-20 kit to the RJ11
socket on Battery Powered SDI . Connect the DB9 connector of the ASDIB-20 kit to the PC COMM port of a PC that has the
SDI software installed .
3 . Open the interface software .
4 . Select
Configuration
in the menu and select the appropriate COMM PORT .
5 . Select
Parameters
to open the
Parameters
screen .
Programming
Page 15
May 2017
SEN-UM-00217-EN-10
