Seite / Page / Page 17
April/April/Avril 2023
AUT-UM-03446-DE-02
Bedienungsanleitung / User Manual / Manuel d´installation
PROGRAMMING OF LM OG (CND) AND LM OG-HF (CND)
Measuring unit
TOTAL
resettable (Keep
TOTAL
pressed,
then pressed, then press
RESET
)
TOTAL
not resettable
The fourth figure can now be changed .
To access the next figure, press
TOTAL
.
Press
TOTAL
one time to switch on
the meter .
The fifth figure can now be changed .
Press
TOTAL
3 times then press
RESET
3
times (quickly) to access the programming
mode . Measuring unit “L” (liter) is flashing
and can be changed in L, GAL, QT or PT by
pressing
RESET
. Press
TOTAL
to confirm the
new measuring unit .
Press both buttons simultaneously to save
the programming .
The meter then goes to the sleeping mode .
Press
TOTAL
one time to change the
k-factor .
The figure to be changed is flashing and can
be modified with
RESET
.
To change the next figure, press
TOTAL
.
Sleeping mode
The second figure can now be changed .
To access the next figure, press
TOTAL
.
After the sleeping mode, press
TOTAL
to
show the normal display mode .
The third figure can now be changed .
To access the next figure, press
TOTAL
.
Press
RESET
for 3 seconds and the register
displays the checksum .
