Operation page
1/11
IND_MNMR100_Bedienungsanleitung_0703_e.doc
1. GENERAL INFORMATION
Please read and retain this instruction manual to assist you in the operation and maintenance
of this electronic register.
This manual assists you in operating and maintaining your new electronic LCD register. The
information contained will help you ensure many years of dependable performance and
trouble free operation. Please take a few moments to read through this manual before
operating your electronic register. If you experience problems with this product, refer to the
maintenance and trouble shooting sections of this manual. If you require further assistance
please contact your local distributor.
2. Operation
2.1 Display
button
Each press of the DISP button will allow you to scroll through the meter options:
- Resettable batch total
- Resettable accumulative total
- Non resettable accumulative total
- Flowrate
2.2 Reset
button
The RESET button allows you to reset the batch total or the resettable acumulative total
to zero. To reset either the batch total or resettable acumulative total. Press the DISP
button to scroll to either the batch or resettable total. When the required total is
displayed. Press reset to zero the totalizer.
2.3 Flowrate
This display option shows the flowrate of the fluid passing through the meter.
2.4 Sleep
mode
If NO flow goes through the meter for 60 seconds the display will go into sleep mode
(blank). The display will automatically wake if the buttons are pressed or flow occurrs.
2.5 Battery
replacement
Note: Replace the batteries as soon as the battery indicator on the LCD is displayed.
1. Remove the plastic protector shroud from the register assembly (figure 1).
2. Remove the battery cover.
3. Replace the 2 x (AAA) Alkaline batteries.
(Refer to the front of the register for correct battery orientation).
4. Replace the battery cover and re-fit the plastic shroud.
All data will be saved when the batteries are removed.
Note: Only use AAA Alkaline batteries!
figure 1
