background image

Warranty  

page 

11/11 

IND_MNMR100_Bedienungsanleitung_0703_e.doc 

 
 

5. Warranty 

 
Badger Meter warrants that the products will be free from any defects caused by faulty 
material or workmanship for a period of twelve (12) months from the date of sale of the 
products to the enduser (the ‘warranty period’) PROVIDED THAT, during the warranty period: 
 
1. Badger Meter receives notice setting out full details of any defect in any product and 

details of the time and place of purchase of the product and 

 
2. The enduser returns the product to Badger Meter or its nearest representative at its own 

costs. 

 
Badger Meter shall, as its option, repair or replace the product found defective by its 
inspection or refund the price paid by the enduser for that product. 
 
Badger Meter's liability and the enduser’s rights under this warranty shall be limited to such 
repair, replacement or refund and, in particular, shall not extend to any direct, special, indirect 
or consequential damage or losses of any nature. 
 
 
Note: 
This warranty does not form part of, nor does it constitute, a contract between Badger Meter 
and the enduser. It is additional to any warranty given by the seller of the products and does 
not exclude, limit, restrict or modify the rights and remedies conferred upon the enduser, or 
the liabilities imposed on the seller, by any statute or other laws in respect of the sale of the 
product. 
 

 
 
 

Summary of Contents for MN-MR100















Reviews: