Meter operation
page 29/43
LM_OGP2Adv_BA_99_1104
NOTE: When programming option 3:
• P
ress the 10 button to increase a batch amount in
increments of 100 units
•
Press the 1 button to increase a batch amount in
increments of 10 units
•
Press the 0.1 button to increase a batch amount in
increments of 1 unit
NOTE: See Count Up/Down Mode specifications under 6.3.
3. After the batch size is selected, press the button to lock in the batch and
dispense fluid.
4. Pull the trigger to begin the flow.
The solenoid valve in the meter
automatically locks the dispensing
valve in the full open position.
The meter always locks in the maximum
open position.
5. Release the trigger, allowing it to fall back.
6. The flow automatically shuts off after the batch quantity has dispensed.
7. After the batch quantity has been dispensed the meter is a free flow-dispensing
handle until the reset button is depressed.
NOTE: In case of an emergency or to interrupt a batch, the meter is equipped with an
emergency override (see emergency override under 7.2).
8. The user has the option to top off the fluid at the end of a batch.
To top off the fluid, pull the trigger to begin the flow and release it when the desired
amount has been pumped.
9. Press the button when finished. The display resets and the meter is now ready
to dispense the next batch.
6.3 Count up / count down modes
1. When in the auto batch programming mode, press the button and the count
up/count down arrows flash in the display.
• Press the button to toggle between count up/count
down.
• Press the button to select count up or count
down.
Count up arrow
Auto batch program mode, option 3
Auto
batch
size
Auto
icon
Summary of Contents for LM-OG-P2 Advanced
Page 47: ......
