Meter operation
page 28/43
LM_OGP2Adv_BA_99_1104
6. Meter operation
NOTE: The keypad Auto button is used to toggle between Manual Mode and Auto Batch
Mode.
6.1 Manual
mode
In the manual mode the meter operates as a free flow-
dispensing handle.
1. Pull the trigger to begin the flow.
2. The display shows the amount dispensed.
3. When the desired amount has been dispensed,
release the trigger to stop the flow.
4. Press button
once
to reset the counter display
to
zero.
6.2 Auto
batch
mode
To enter the auto batch programming mode, press the button until a digit and
colon appear.
This screen appears.
The meter is now ready to select the desired batch
number.
• The ‘0’ is flashing in front of the colon. This is the batch
number icon.
• Batch ‘0’ is for manual mode (see manual mode,
above).
• Batches ‘1’, ‘2’, ’3’, ’4’ and ’5’ are for auto batching
amounts up to 99 units.
• Different
batch
amounts
can be stored in each option.
• Batch ‘6’ is for batches between 1 and 999 units.
1. Press the button to cycle through the batch number icons to select the desired
batch or manual mode.
2. When the desired batch number icon appears on screen, change the batch size by
pressing the and buttons.
• Press the 10 button to increase a batch by 10 units.
• Press the 1 button to increase a batch by 1 unit.
• Press the 0.1 button to increase a batch by 0.1 of a
unit.
Manual mode
Auto batch program mode
Auto batch program mode, option 1
Summary of Contents for LM-OG-P2 Advanced
Page 47: ......
