Meter installation
page 27/43
LM_OGP2Adv_BA_99_1104
5.4 Apply meter to hose
Close the drain valve before starting this procedure.
1. Attach swivel to meter. Apply thread sealant to
the male end of the hose. Recommended sealant
is Loctite
®
243.
2. Insert the metal end of the hose into the swivel.
Tighten
completely
with an open ended,
adjustable, wrench.
NOTE:
The threaded end of the meter always has
female threads. The metal end of the hose must
have male threads. Apply thread sealant, Loctite
®
243 or equivalent, to the male end. The inlet and
outlet swivel connections are either 1/2" NPT or 1/2"
BSPP, depending on meter model.
Attach the hose
5.5 Apply nozzle to meter
1. On the opposite end, apply sealant to the end of
the nozzle. Recommended sealant is Loctite
®
243.
2. Thread the nozzle onto the meter. Screw it in
tightly with an open ended, adjustable, wrench.
3. Open all dispense position shut-off valves. Start
the pump to pressurize the system.
4. Before use, to ensure accuracy, purge all air from
the fluid lines and dispense valve(s).
Attach
the
nozzle
Summary of Contents for LM-OG-P2 Advanced
Page 47: ......
