Saving/Loading Software Configurations
SAVING/LOADING SOFTWARE CONFIGURATIONS
You can save the current software application’s settings to a configuration file that you can recall at a later time This feature is
useful for tests that use different measuring units and alarm settings Rather than resetting each parameter, you can recall all
test parameters from a file
Saving Software Configurations
1 If in the
Run
or
Record
mode, click
Stop
2 Set all software parameters to desired settings
3 Select
File > Save Setup Configuration
from the main menu
4 A
Save Data File as…
dialog box asks you to name the configuration file and where to save it Type a name in the
filename:
text box and click
Save
OTE:
N
The default location for saving a configuration file for Windows XP and Windows 2000 is
C:\Documents and Settings\<user name>\My Documents\Flo-tech\Hydraulic System Analyzer\Configurations
The default location for saving a configuration file for Windows Vista® is
C:\Users\<user name>\Documents\Flo-tech\Hydraulic System Analyzer\Configurations
Loading Software Configurations
1 If in the
Run
or
Record
mode, click
Stop
2 Select
File > Open Setup Configuration
from the main menu
3 A
Select Data File to Open…
dialog box asks you to select the desired configuration file Select a configuration file and
click
Open
OTE:
N
The default location of this dialog box shows files in the following folder for Windows XP and Windows 2000 is
C:\Documents and Settings\<user name>\My Documents\Flo-tech\Hydraulic System Analyzer\Configurations
The default location of this dialog box shows files in the following folder for Windows Vista® is
C:\Users\<user name>\Documents\Flo-tech\Hydraulic System Analyzer\Configurations
Page 16
June 2022
TST-UM-02433-EN-02