Using the Alarms
USING THE ALARMS
There are three sets of High / Low alarm indicators on the main screen that monitor pressure, temperature and flow rates The
alarm indicators flash if the current system measurements exceed the set alarm limits The alarms continue to flash when the
current system measurements return back to normal to alert you that an alarm condition occurred You must reset the alarms
manually to acknowledge the alarm condition Upon exiting
Run
or
Record
mode, you can view all alarm events (time, value,
alarm level) in another form These alarm events are also recorded to the csv file when in
Record
mode
Changing Alarm Settings
1 If in the
Run
or
Record
mode, click
Stop
2 Select
View > Alarm Settings
from the main menu
Figure 4: Alarm settings screen
3 Click the
Up/Down
arrows to adjust the level of each alarm to the desired position
4 Click
Exit
The alarm level for each measurement is indicated on the strip-chart by the highlighted area shown on its associated scale
Any measurement taken inside the highlighted area triggers the alarm
Resetting the Alarms
Click
Reset Alarms
Alarms are reset if the alarm condition is false
Page 14
June 2022
TST-UM-02433-EN-02