Badger Meter Dynasonics UHC100, User Manual

Page: 31 / 52

Cable Destination Cable Marking*** Wire Destination Wire Color
M-Bus 1 interface MBUS1
Line brown
Line white
M-Bus 2 interface MBUS2
Line brown
Line white
M-Bus interfaces (two) * MBUS
Mbus1 Line brown
Mbus1 Line white
Mbus2 Line yellow
Mbus2 Line green
1
st
pulse input/output PULS1
Pulses (+) brown
Common (-) white
2
nd
pulse input/output PULS2
Pulses (+) brown
Common (-) white
Pulse inputs/outputs (two) * PULS
Pulses1 (+) yellow
Common1 (-) green
Pulses2 (+) brown
Common2 (-) white
ModBus® interface MODBUS
Line A brown
Line B white
24V AC/DC** yellow
24V AC/DC** green
CL interface CL
CL+ brown
CL- white
MiniBus interface MINIBUS
Line+ brown
Line- white
For external power supply from 230V AC mains 230V AC
230V L brown
230V N white
For external power supply from 24V AC/DC source 24V AC/DC
24V AC/DC brown
24V AC/DC white
*The option for the case when two extra cables are included at a time
**Not used when the meter is powered from an external power supply source
***When a second extra cable is not included, the M-Bus1 cable is not marked additionally
Table 4: Destination and marking of the extra cables of the heat meter
Cable Connections
Page 31 November 2020 HYB-UM-03193-EN-02