background image

15

© Copyright 2012 Badger Fire Protection

Extinguisher Part Numbers

Badger Carbon Dioxide Wheeled Extinguishers:  
CD50, CD50-1, CD100 and CD100-1

Item 

Part Numbers 

Description

1 22780                                 CD-50-1 Frame Assembly (Does not include wheels)
 22782                                 CD-100-1 Frame Assembly (Does not include wheels)

 22754                   -Wheel - 16” semi-pneumatic (2 required)

 22770                   -Flat washer for axle (2 required)

 22751                   -Cotter pin for axle (2 required)

5 22746                                 Cylinder assembly (charged with valve and cap)

 22749                   -cylinder valve

 22797                        ring pin

 22777                        chain

 22776                        chain drive pin

10 

 24643                                 safety relief assembly (nut, disc and washer)

11 

 22776                   -siphon tube assembly

12 

 13735                   -replacement non-flammable gas label

13 

 22785                   -replacemtn UN-1013 label

14 22873                                 Replacement operating instruction CD-50-1 (w/o manifest)
 22874                                 Replacement operating instruction CD-100-1 (w/o manifest)

15 13120                 Visual inspection Seal (red field replacement)

16 22816                                 Manifold assembley (CD-100-1 model only)

17 22887                                 CD-50-1 Agant discharge hose assembly - 15 ft 
 22885                                 CD-100-1 Agant discharge hose assembly - 40 ft 

18 22867                                          Discharge nozzle assembly
19 

 05310                   - discharge valve assembly

20 

 22814                   - horn retaining nut

21 

 22811                   - discharge horn

22 

 22809                                  - nozzle

23 

 22810                   - insulated handle

24 

 22812                   - pipe nipple

Summary of Contents for CD50

















Reviews: