Establishing Base Reference Point
For the Flex Base to operate properly, a reference point must
be established for the transmission of corrections. The
reference point must be within ??ft/??m or an error condition
occurs and the Base cannot start.
There are three options to establish a Base reference point.
1. Here point - this is a position derived from the current
GNSS location and mode of operation
2. Last collected point - this is a position derived from the
last collected point through the use of the standalone
point collection feature of Flex
3. Known point - a list of known points is provided, if
available. Known points are loaded into the Flex app
by ????
Base Reference Point - Capture
The default method used to establish a base reference point
is a “Here” point. Pressing the “Capture” button starts a timed
point recording.
Base Reference Point - Established
Once the Base reference point is established, the coordinates
and results are displayed for confirmation.
note : obscure the location
Using a Known Base Reference Point
Copyright © 2022. Bad Elf, LLC.
43
All Rights Reserved.
