Bad Boy 2024H 2021 Operator'S Manual Download

Page: 139 / 152

BAD BOY TRACTOR

Symptom

Inspection item

Action

6. The coolant warning

lamp is turned “ON”

during operation.



Is the coolant level in the reservoir tank low?



Refill the coolant.

7. The engine oil pres-

sure lamp is turned

“ON” during opera-

tion.



Is the engine oil level low?



Refill the engine oil up to required level.



Is the viscosity of the engine oil low?



Replace the engine oil with proper viscosity.



Is the pressure switch defective?



Replace the switch.



Is the oil pump defective?



Contact the dealer for repair.

8. The battery charge

warning lamp is

turned “ON” during

operation.



Is the alternator defective?



Contact the dealer for repair.



Is the fan belt loosened or damaged?



Adjust the fan belt tension or replace it.

2024h_3026h.indb 4

2020-09-18 오후 6:17:33

Summary of Contents for 2024H 2021

























































































































































Search results

Summary of Contents for 2024H 2021

Reviews:

Related manuals for 2024H 2021

Brands by name

Popular brands

Bad Boy 2024H 2021, Operator'S Manual

Search results

Summary of Contents for 2024H 2021

Reviews:

Related manuals for 2024H 2021

Brands by name

Popular brands