6
-
9
MAINTENANCE
6
FILTERS / COOLANT REPLACEMENT
ENGINE OIL FILTER
FRONT AXLE FLIUD
(1) Engine Oil Filter
Replace it every 300 hours or when
engine oil is changed.
•
First 50 hours, filter has to be
changed.
NOTE
►
REPLACEMENT
1. After draining the engine oil, turn
the cartridge to the left with the fil
-
ter wrench.
2. Apply a thin film of oil over the rub
-
ber ring on the bottom of the new
cartridge and attach the new filter
securely.
3. After changing the engine oil, start
the engine and run it until the en-
gine oil pressure warning lamp is
turned off .
4. After the oil pressure warning
lamp is turned off, check the oil
level again. Add oil as necessary.
►CHANGING OIL
Drain the fluid through three drain
holes under the front axle.
Refill the fluid from the upper right
side of the front axle
(1) Drain Plug
2024h_3026h.indb 9
2024h_3026h.indb 9
2020-09-18 오후 6:17:30
2020-09-18 오후 6:17:30
Summary of Contents for 2024H 2021
