Bad Boy 1025H, Operator'S Manual, Page: 125 / 144

6
-
17
MAINTENANCE
6
CHECKING THE WIRING HARNESS AND FUSES
Loose wires make inferior connections
and damaged wires can cause short
circuits, fires burnt wiring or reduce the
efficiency of the components.
Replace or repair any faulty wiring or in -
sulation.
If a fuse burns out again after it has
been replaced, do not replace it with
wire or a high capacity fuse, find the
cause and rectify it or get an auto elec -
trician to do so.
Where insulation is chafed or peeled
off, recover the area with a good quali-
ty insulation tape. Where wiring comes
out of it’s fitting, replace it correctly with
the standard fitting.
IMPORTANT

Incorrect wiring or fuses can
cause fires to both the tractor
and surrounding area so get the
dealer to check it annually.

Likewise fuel pipes and wiring
age with use.

Ask your dealer to check it at
least once every 2 years and re-
place as required.
REPLACING FUSES
The circuit has blade type fuses in its
wiring circuit When a fuse has blown,
replace it with one of the same value.
Using a large capacity fuse or wire
burns out the wiring system.
Use fuse tongs to replace fuses.
1025H.indb 17 1025H.indb 17 2021-07-06 오전 11:07:52 2021-07-06 오전 11:07:52