18
RIGHT SIDE WALL PANELS
48 x 72"
(121,9 x 213,4 cm)
PARTS REQUIRED:
x1
x45
2" (5,1 cm)
Fig. B
Fig. A
Flush
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
DOO
R
BEGIN HERE
INSTALL ALL WALL PANELS WITH THE PRIMED SIDE FACING UP
48"
(121,9 cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
20-5/8"
(52,4 cm)
12"
(30,5 cm)
1”
(2,5 cm)
6"
(15,2 cm)
Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Ensure your wall frame is square by installing (1) panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side until you have
a 3/4" measurement on the wall stud. Secure corner with (2) 2" nails
(Fig. B)
.
3
4
2
3/4" GAUGE
BLOCK
Primed
side up
For squareness maintain flush and
3/4" measurement along panel edges.
Place
48 x 72"
panel onto wall frame flush to top of frame with primed side up as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud. Secure panel using
(2) 2" nails in the corners
(Fig. A)
.
3/4" GAUGE
BLOCK
GAA