33
DOO
R
3" (7,6 cm)
PARTS REQUIRED:
RAFTERS
x5
x1
x24
FINISH
Install remaining rafters aligned over studs as shown.
Secure using 3" screws
(Fig. B)
.
Secure rafter to top plate using (2) 3" screws above notch
(Fig. A
,
B)
.
Your rafters are now installed.
2
BEGIN
¸
1
Align over studs.
Fig. B
Fig. A
Flush to inside of panel.
Install the
(1) GUSSET
rafter aligned with front stud, flush to inside of front wall panelsc and tight
to side wall
(Fig. A, B)
.
Face gusset inward.
Rest notch on top plate
.
(2) 3" (7,6 cm)
Screws
(2) 3" (7,6 cm)
Screws
Tight to side wall
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
23-1/4"
(59 cm)
Rafter with ONE GUSSET facing inward.
MEASUREMENTS ARE TO CENTER OF RAFTER
Preassembled
Preassembled
(1) GUSSET