PARTS REQUIRED:
3/4"
GAUGE BLOCK
GAA
EAVE SIDE WALLS
2" (5,1 cm)
x45
Place a
46-1/8" x 72"
panel onto left wall frame with primed side up as shown.
Locate the panel 1-1/2" above the top plate. Use a
DQ
as a gauge block for the 1-1/2" top
overhang measurement. Use the
GAA
gauge block to mark the 3/4" side measurement on the
wall stud. Secure panel using (2) 2" nails in the corners
(Fig. A)
.
3
2
Nail the panel using 2" nails 6" apart on edges and
12" apart inside panel.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the
panel as a lever, move the panel side-to-side until you
have a 3/4" measurement on the wall stud. Secure
corner using (2) 2" nails
(Fig. B)
.
2x3"
GAUGE BLOCK
DQ
Fig. A
3/4"
(1,9 cm)
2 Nails
1-1/2"
(3,8 cm)
Overlap
Fig. B
1-1/2"
(3,8 cm)
Overlap
2 Nails
3/4"
(1,9 cm)
2 x 3"
14
3/8 x 46-1/8 x 72"
(1 x 117,2 x 182,8 cm)
x1
For squareness maintain 3/4" and 1-1/2"
measurement along panel edge.
BEGIN HERE
Panel will be
back from
frame approx.
1/4"
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
12"
(30,5 cm)
Primed side UP
3/4" Gauge
Block
6"
(15,2 cm)
46-1/8"
(117,2 cm)
