34
DOO
R
3" (7,6 cm)
PARTS REQUIRED:
RAFTERS
x5
x2
x28
Align over studs.
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24-3/8"
(61,9) cm)
24-3/8"
(61,9) cm)
MEASUREMENTS ARE TO CENTER OF RAFTER
Preassembled Rafter
(2 gussets)
Preassembled Rafter
(1 gusset)
MEASUREMENTS ARE TO OUTSIDE OF WALL PANEL
FINISH
Install remaining rafters on top plate, aligned over studs, as shown. Secure with 3" screws.
Secure rafter to top plate with (2) 3" screws above notch
(Fig. B
,
C)
.
Your rafters are now installed.
3
BEGIN
¸
1
Locate first rafter on top plate
(Fig. A)
aligned over studs at each side and tight to side wall
(Fig. B, Fig C)
.
Rest notch on top plate.
2
BEGIN
HERE
Fig. C
Tight to side wall
(2) 3" (7,6 cm)
Screws
Fig. B
(2) 3" (7,6 cm)
Screws
Tight to side wall
Fig. A
Flush to
outside
of panel
Flush to
outside
of panel
Rafter with
ONE GUSSET
facing inward.
Rafter with
ONE GUSSET
facing inward.
