![background image](http://html1.mh-extra.com/html/backyard-discovery/tucson-65411/tucson-65411_owners-manual_3402501048.webp)
Anchoring Instructions
Phase 20
Phase Notes
• Assemble with hardware as shown.
• Install the screw into the upright so that the
tip of the screw does not stick through. Make
sure you have enough wood to accommodate
the screw before installing.
• FAILURE TO USE STAKES CAN VOID
WARRANTY & CAUSE INJURY!
Parts needed:
• (6) KD - PLASTIC GROUND STAKE BROWN - A100179
• (4) FA - QUICK LINK - A100069
• (4) EZ - CHAIN GREEN 51.25" - A100068
• (2) FB - SWING SEAT YELLOW - A100070
• (2) FW - CHAIN GREEN 31" - A100112
• (1) KF - PLASTIC TRAPEZE BAR YELLOW - A100109
Hardware needed:
• (6) CK - SCREW PFH 8x2 - H100111
Step 2: Attach Swing Seats 'FB' to
swing beam using Quick Clip 'FA' and
Chain 'EZ'.
Step 3: Attach Trapeze Bar 'KF' to
swing beam using Chain 'FW'.
Final Step: Double check and make sure
every bolt, screw and nut is tight. Make
sure every board is secure. Make sure
the fort is level and enjoy your swing set.
TIGHTEN QUICK
LINK
INSERT CHAIN INTO
QUICK LINK
Step 1: Drive Stakes 'KD' into the ground
against boards where shown and attach
with Screws 'CK', as shown.
KD
G8
CK
STAKE
TRAPEZE
SWING
STAKE
SWING
STAKE
STAKE
STAKE
STAKE