![background image](http://html1.mh-extra.com/html/backyard-discovery/tucson-65411/tucson-65411_owners-manual_3402501039.webp)
Fort Assembly
Phase 11
Phase Notes
• Assemble with hardware as shown.
Hardware needed:
• (2) BG - T-NUT 5/16 - H100074
• (8) AC - WASHER LOCK EXT 8x19 - H100030
• (2) L - BOLT WH 5/16x2-1/4 - H100013
• (6) Z - LAG SCREW WH 5/16x2 - H100027
• (12) CK - SCREW PFH 8x2 - H100111
• (6) BR - SCREW PFH 8x1-1/8 - H100088
Parts needed:
• (2) H8 - PICNIC SUPPORT - W101628
• (2) F2 - ANGLE BRACE - W101629
• (3) M2 - FLOOR BOARD - W101525
• (1) M8 - PICNIC CLEAT - W101632
Step 1: Pre-drill and attach 'H8' Picnic Support to 'E1' &
'E2' fort uprights using Lag Screws 'Z' and Washer 'AC'.
Attach 'F2' Angle Brace to 'H8' picnic support using Bolt
'L', Washers 'AC' and T-Nut 'BG'. (The T-Nuts will need to
be inserted into the 'F2' angle brace before it is attached
to the uprights.) Attach 'F2' angle brace to 'E1' fort
upright using Lag Screws 'Z' and Washers 'AC', as
shown. Repeat this process to attach the picnic support
to the other side. Now, attach 'M2' Floor Boards to 'H8'
picnic support using Screws 'CK', as shown.
Note: Do not overtighten screws, overtightening
may cause the screw to stick through the boards
and may cause sharp points. The head of the
screw should NOT sink into the wood for this
phase, it should be flush.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
Note: It is vital that the fort
be level before and after
each phase of assembly.
Step 2: Pre-drill and attach 'M8'
Picnic Cleat to 'M2' floor board
using Screws 'BR', as shown.
CK
M2
BG
F2
Z
AC
Z
AC
L
AC
H8
E1
BR
BR
M2
M8