XXLarge Bolt-Nut-Washer (S) 2pcs
10x280mm
Support (H2)
3x35mm
Screw (K) 26pcs
Tete-to-Tete Swing Assembly Instructions
Top Crossbar (A) 1pc Legs (B) 4pcs
Top Supports (C) 4pcs
Cross Supports (D) 2pcs
Swing Posts (E) 2pcs
Seat (G) 1pc
Support (H1)
Table (I) 1pc
Seat Back (F) 2pcs
ADDITIONAL DETAILS / WARNINGS:
l
seat.
l
Do not throw away any packaging until assembly is complete.
l
Assemble product on a soft surface so as not to scratch or damage the
item.
l
Keep parts and packaging away from children and pets.
l
For ease of assembly, two people are recommended.
l
To allow for slight adjustments, do not over-tighten screws or bolts until
the swing is fully assembled.
l
We recommend using a rubber mallet to tap the pieces of this product
together during assembly and a power drill to tighten all screws.
l
Make sure the frame is placed on a level surface.
l
Do not leave children unattended on swing.
l
Do not climb, jump off or hang from the swing or frame.
l
Do not sit or stand on the swing table.
l
To avoid injury, periodically check the swing and all hardware for signs
of wear and possible metal fatigue that may require repair or
replacement.
l
Check all hardware to be sure screws, bolts and nuts are tight.
l
Solid wood such as this has knots and marks which are normal and
should be considered an enhancement to the natural beauty of the
product.
PARTS LIST
Eye Bolt-Nut-Washer (P) 2pcs
Arm (J) 2pcs
Seat Supports (R) 4pcs
x85mm
8
8x100mm
8x120mm
8x140mm
XLarge Bolt-Nut-Washer (O) 4pcs
Medium Bolt-Nut-Washer (M)
2pcs
Small Bolt-Nut-Washer (L)
8pcs
Large Bolt-Nut-Washer (N)
4pcs
S-Hook (Q) 4pcs
HARDWARE LIST
2pcs
2pcs
This product is designed for a maximum capacity of 150 pounds per
