STEP 5
Drill 3/16” pilot hole using the pre-drilled holes in the
Monkey Bar Ground Board G1 as guide and attach it to
the End Ladder assembly using two 2-1/2” Lag Screws,
Lock Washers and Flat Washers. Tighten the screws
securely but do not over tighten.
STEP 6
Attach the two Short Angle Braces E4 to the
End Ladder Rails E1 with 3-1/4” Hex Bolts
,
Lock Washers, Flat Washers and Spike Tee
Nuts.
Drill 3/16” pilot holes using the pre-
drilled holes in the Ground Board as
guide and attach it to the Short Angle
Braces using 2” Lag Screws, Lock
Washers and Flat Washers.
G1
E4
E4
E1
G1
Meijer.com
Summary of Contents for Next Generation 5007
Page 3: ...Meijer com...
