STEP 15
Attach H14 Lower Top Floor Joist to H7
Right Floor Rail and H8 Center Floor
Rail using four 2-1/2” Wood Screws.
Note: Center screws into H14.
STEP 16
Attach 5/16” Spike T-Nuts on outside of Floor Rails on
left front and back of Upper Floor Rails and front and
back of Lower-Upper Floor Rails. Now attach Y2 Deck
Braces using 5/16 x 1-1/4” Hex Bolts, Internal Tooth
Lock Washers and Flat Washers. At this point, level
Set at each corner and attach Y2 Deck Braces, to the
Tower Posts, pilot drill using 3/16" bit and attach using
2-1/2” Lag Screws, Internal Tooth Lock Washers and
Flat Washers.
STEP 17
At this point, place the Y18
Plastic Post Caps on all six of
the Tower Posts.
H14
C1
C1
C1
C1
C3
C3
C3
C3
C2
C2
C2
C2
H3
H3
H3
H6
H6
H8
H7
H7
H12
H13
H14 Floor Joist * No Holes * 1 Req
1 x 3-1/2 x 20 [ 2.54 x 8.89 x 50.80 ]
Y18
Plastic Cap
6 Required
METAL DECK BRACE
6 REQUIRED
Y2
5/16 X 1-1/4"
HEX HEAD
BOLT
5/16 X 2-1/2"
LAG
SCREW
5/16"
SPIKE TEE
NUT
5/16"
INTERNAL
TOOTH
LOCK
WASHER
5/16" FLAT
WASHER
#8 X 2-1/2"
WOOD
SCREW
© Leisure Time Products Inc.
Next Generation 5007 10-0409 Version 4
Page 18
Meijer.com
Summary of Contents for Next Generation 5007
Page 3: ...Meijer com...
