39
2
PARTS REQUIRED:
x1
DOORS
OO
72" from
gable panels
OO
Fig. A
OO
2 x 3 x 69" (5,1 x 7,6 x 175,3 cm)
Center doors on panel seam as shown
(Fig. B)
.
3
Check hinge board is Á ush under gable panels (Fig. C).
Remove temporary supports and check doors open properly.
5
FINISH
6
You have nished installing your doors.
Screw hinge boards into wall supports and oor at each corner of door frame
using (4) 3" screws as shown. Continue to secure frame using (6) 2" screws.
Make sure screws go into framing and Á oor
(Fig. D, E)
.
4
3" (7,6 cm)
Screws into four
corners of wall.
2" (5,1 cm)
Screws into middle of wall
Fig. B
Center 3/8"
on panel seam.
Fig. D
Fig. C
3/8"
(1 cm)
Fig. E
Angle 3" (7,6 cm)
Screw
Flush
72" (182,9 cm)
from bottom of
gable panel to
top of ledger
board
Attach temporary support
OO
as a ledger board for doors to rest on,
using three 3" screws. Measure 72" down from gable panels
(Fig. A)
.
3" (7,6 cm)
x7
2" (5,1 cm)
x6
