25
2" (5,1 cm)
PARTS REQUIRED
x2
x17
BACK WALL INSTALLATION
3" (7,6 cm)
3" (7,6 cm)
x8
Center back wall assembly on the 96" (243,8 cm) oor dimension.
BEGIN
1
First, nail lower edge of panel to oor frame using 2" nails 6" apart.
Angle nail to hit oor frame
(Fig. A)
.
2
Nail back wall bottom plates to oor using (3) 3" nails.
Screw back wall upright to oor using (2) 3" screws
(Fig. B)
.
Nail back wall top plate to side wall using (2) 3" nails
(Fig. C)
.
Remove
OO
temporary brace.
Nail Back wall panel to side wall stud using (17) 1-1/2"
nails at 6" apart.
3
4
5
6
3" Nails into bottom plate.
6"
15,2 cm
Center wall assembly on Á oor.
R
DOO
Nail 2" nails À rst.
Angle to nail into
Á oor frame.
2" (5,1 cm) Nail
Fig. A
Flush
(2) 3" (7,6 cm) Nails
(2) 3" (7,6 cm)
Screws
Fig. B
Fig. C
x17
1-1/2" (3,8 cm)
(17) 1-1/2" (3,8 cm)
Nails
FINISH
7
