PCA
3 Manual
42
0024-9473 Rev 3
NOTE:
A number sign (#) denotes the current O
2
Reference
selected. Stars (***) appear in measurement and calculation fields
of sensors that are not installed.
Change the order in which data is displayed as follows.
1. Display the MAIN MENU by pressing the
MENU (F2)
button. If
necessary, press
ESC
until MENU appears above
F2
.
2. Use the ▲▼ buttons to highlight SETUP, and then press
ENT
to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight RUN/HOLD FORMAT, and then press
ENT
to display Run/Hold Format Menu.
4. Use the ▲▼ buttons to highlight Edit Format, and then press the
ENT
key to show the Edit Run/Hold Format, where the current order of
combustion data is displayed.
5. Change data shown for a particular location by first using the ▲▼
buttons to highlight the location. Then press the
ENT
key to select the
location; the cursor will start to flash.
6. Use the ▲▼ buttons to scroll through and select the desired data to
appear at that location. Press the
ENT
key to make the selection.
7. Change data displayed at other locations by repeating Steps 5 and 6.
8. When finished, use the ▼ button to highlight Edit complete at the
bottom of the list, then press
ENT
to save the new display format and
return to the Run/Hold Format screen.
Figure 4-24. Changing the Order in Which Data Is Displayed
Reset Display format back to factory default settings as follows.
1. Display the MAIN MENU by pressing the
MENU (F2)
button. If
necessary, press
ESC
until MENU appears above
F2
.
2. Use the ▲▼ buttons to highlight SETUP, and then press
ENT
to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight RUN/HOLD FORMAT, and then press
ENT
to display Run/Hold Format Menu.
Summary of Contents for PCA3
