PCA
3 Manual
40
0024-9473 Rev 3
1. Display the MAIN MENU by pressing the
MENU (F2)
button. If
necessary, press
ESC
until MENU appears above
F2
.
2. Use the ▲▼ buttons to highlight SETUP, and then press
ENT
to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight LANGUAGE SELECTION, and then
press
ENT
to display The Language Selection Menu.
4. Use the ▲▼ buttons to highlight the desired language, then press
ENT
to activate the selection and re-display the Setup Menu.
Figure 4-22. Selecting a Language
4.20. Calibration Reminder Period
The analyzer can be set to indicate a calibration reminder during the 60 second
warm-up period. Calibration reminders can be preset to occur never, 6, 8, 10,
12, or 15 months after the last calibration. When the preset period is exceeded
the instrument will display the reminder, and how long since the sensors were
last calibrated. The reminder will be displayed at the end of the 60 second warm-
up period. If a calibration reminder is displayed the operator can press the
RUN/HOLD key to move to the Run/Hold screen for normal operation. Regular
calibration periods of 6 months to a year for all gas sensors (except Oxygen) are
recommended. Set the calibration reminder period as follows.
1. Display the MAIN MENU by pressing the
MENU (F2)
button. If
necessary, press
ESC
until MENU appears above
F2
.
2. Use the ▲▼ buttons to highlight SETUP, and then press
ENT
to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight CAL REMINDER PERIOD, and then
press
ENT
to display CAL Reminder Period Menu.
4. Use the ▲▼ buttons to highlight the desired CAL reminder period, and
then press the
ENT
key to activate the selection and re-display the
Setup Menu.
NOTE:
The date and time settings must be correct to get accurate
calibration reminders.
Summary of Contents for PCA3
