System Setup
Manual Part Number:
5-06-4900-53-0
Revision Level: C
ECO 044952
Revision Date:
May 08, 2018
Page
4-14
4.1.2.12.2 Automatic Serial Output Format
This menu sets the format of the automatic timed RS-232 serial output. The timed serial output
format may be set to 0 (Output on Request), 1 (Human Readable), 2 (Machine Code), 3 (Machine
Code with Checksum), 4 (Tab Delimited). This menu is accessed from the RS-232 Serial Setup
menu by typing “2” on the RS-232 terminal.
4.1.2.13
(U60) Front Panel Locks Menu
This menu enables and disables the features and settings that may be accessed from the Mini-ICS
front panel keypads. This menu may be accesse
d from the Setup Main Menu by pressing “6” on
the RS-
232 terminal. To navigate backwards, use the <Esc> or “Q” key on the RS-232 terminal.
4.1.2.13.1 Master Lockout
If the Master Lockout is enabled, the user may only
view
the Calibration Gas value, O
2
Alarm
setting, High ICS setting, and Low ICS setting. The user may not execute Gas Auto calibration or
the Front Panel User Setup menu. The Master Lockout setting is accessed from the Front Panel
Locks menu by typing “1” on the RS-232 terminal.
4.1.2.13.2 Gas Calibration Lockout
If the Gas Calibration Lockout is enabled, the user may only
view
the Gas Calibration value. The
user may not execute the Gas Auto calibration. The Gas Calibration Lockout setting is accessed
from the Front Panel Locks menu by typing “2” on the RS-232 terminal.
4.1.2.13.3 O
2
Alarm Lockout
If the O
2
Alarm Lockout is enabled, the user may only view the O2 Alarm level setting. The O
2
Alarm Lockout setting is accessed fr
om the Front Panel Locks menu by typing “3” on the RS-232
terminal.
4.1.2.13.4 High ICS Lock-Out
If the High ICS Lockout is enabled, the user may only view the High ICS level setting. The High
ICS Lockout setting is accessed from the Front Panel Locks menu by typin
g “4” on the RS-232
terminal.
4.1.2.13.5 Low ICS Lock-Out
If the Low ICS Lockout is enabled, the user may only view the Low ICS level setting. The Low ICS
Lockout setting is accessed from the Front Panel Locks menu by typing “5” on the RS-232
terminal.
