MNA0010, Revision B October 2014
27
The alarms
will become
active
approximately
120 seconds
after exiting
the calibration
mode.
FIGURE 27 SET ALARM MODE: A look at the Display Panel
2.2.5 STEP 6 Return to RUN mode:
After setting the alarms, press the MODE button to scroll past the FAULT (FLT) mode to
return to normal RUN mode. A time-out is built in to the unit. After approximately 120
seconds (factory default), if no buttons are pressed, the unit will return to normal RUN mode.
See Chapter 3 under “RUN Mode”.
MODE
RUN
FAULT
ALM 1
ALM 2
9.9
T
RACE
O
XYGEN
MODEL 7100 O
2
Analyzer
Mini-Z
IRCONIA
S
ENSOR
NTRON