1100-2294 Rev 1
34
c. Next, use the magnet wand held to the upper switch location (*) on the MVR-300
for 60 seconds. The device should beep once completed.
d. Remove the magnet wand and cycle power. The MVR-300 will have reverted to
default settings and Modbus ID 1.
e. Specify a unique ID for the MVR-300 which can be numbers 2 through16.
f. Tap
Set Unit ID
to apply this ID.
g. Repeat the above steps for each device. Keep track of the assigned IDs and
install according to the floorplan spreadsheet.
Figure 31 - Set Unit ID
Summary of Contents for MVR-SC
Page 1: ...1100 2294 Rev 1 1 ...
