Bacharach MVR-SC, User Manual

Page: 26 / 41

1100-2294 Rev 1 26
The MVR-SC connects to up to seven gateways, using the following default IP address
scheme.
,
The IP address for each Gateway may need to be changed by the user, since they ship with
default IP 192.168.0.1. This can be done using a windows PC and the free Moxa utility.
Steps to change Gateway IP addresses:
8. Connect the first Gateway to be changed to a PC using either Ethernet port. Power the
gateway with 24VDC.
9. Download MGate Manager for windows from:
a. https://moxa.com/en/products/industrial-edge-connectivity/protocol-
gateways/modbus-tcp-gateways/mgate-mb3170-mb3270-series#resources
b. Direct Zip download link
10.
Open the MGate Manager Application. Press the “Search” Button to start looking for
devices
11. Choose Broadcast Search to search on the entire connected
12. When discovered, the Gateway should show up in the table. Select its row and press
Configuration .
a. Note: if this step requires
a password it is “moxa”
13. Navigate to the Network tab (the second tab).
Figure 15 - Network tab
14. In the Network tab you will be able to set the IP. Change the IP
from “192.168.0.1” to the
IP that corresponds with your Gateway index (1
– 7) from the chart above.
15. If this gateway is the first in the network, its IP address is already correct
– 192.168.0.1. If
it is the second, change the last digit to match
– 192.168.0.2, etc.
Order
IP for Gateway
MVR-300 device count
1
192.168.0.1
15
2
192.168.0.2
15
3
192.168.0.3
15
4
192.168.0.4
15
5
192.168.0.5
15
6
192.168.0.6
15
7
192.168.0.7
10