Microprocessor Module Replacement Kit for the Remote Display
2
3015-5577 Rev 2
•
Medium Phillips head screwdriver
•
Medium standard slotted screwdriver
•
Wrench for lock nut
•
Original Remote Display instruction manual (optional)
WARNING:
Failure to comply with these instructions may void the warranty.
3. Procedure Summary
All system settings and configuration settings are returned to factory default values after this upgrade. You may choose to
manually record your system settings and configuration values (e.g., communications parameters)
prior
to
performing this
upgrade, and then re-configure those settings afterwards to your desired values. After the upgrade you will also need to
set the current date and time.
You will need to refer to the Remote Display Instruction Manual originally shipped with your unit for detailed instructions
on setting the date, time, and communications parameters. If you no longer have the manual that shipped with your
device, the standard Remote Display manual may be downloaded from the Bacharach website at
www.mybacharach.com
. If you have any questions, you may contact Bacharach’s Customer Service Department.
NOTE:
Before you begin the microprocessor replacement process, be sure to manually record the values of
any settings you wish to save, as all configured settings will be returned to their factory default values after
the board is replaced. After the microprocessor module is replaced, you may reconfigure these settings.
4. Accessing and Removing the Old Microprocessor Board
To gain access to the microprocessor board follow the procedure below.
Items Required:
Medium Phillips head screwdriver
Procedure:
1. Remove power from the Remote Display.
2. Remove 2 screws from the left side of the chassis to access the inside of the RD.
3. Dissipate any accumulated static charge by touching a grounded area of bare metal.
WARNING
: Failure to touch a metal grounding area on the product can allow static electricity on
your clothing or body to damage the monitor or modules. Such damage is not covered under
warranty.
4. Locate the red microprocessor module, socketed on the main circuit board.
