1100-2290
Revision 0
7
MGS-410 Quick Start Guide
WARNING:
Ensure that all wiring connections are made BEFORE applying
power.
IMPORTANT:
Cable glands are meant to accomodate one cable. DO NOT
use cable glands for more than one cable.
1. Locate connections
(Modbus, Power)
and remove terminal blocks from the
PCBA.
2. Remove plugs from the corresponding M16 cable glands and pass the cable
through the opening.
3. Secure wires in each terminal block and, pressing firmly, reinstall the terminal
block in the PCBA.
4. Remove excess cable from the housing before securing the cable glands and
proceeding to reinstall the sensor.
-
+
Modbus x 2
Power × 2
STEP 2 | Wire Connections
