Manual Part Number:
5-06-7000-81-1, 7-08-1234-
40-0
Manual File:
069706 Rev. A
Page V
For Your Safety:
PLEASE READ THIS MANUAL IN ITS ENTIRETY
BEFORE
ATTEMPTING
INSTALLATION OR OPERATION! Attempting to operate this tool without fully
understanding its features and functions may result in unsafe conditions.
Analyzer Warnings
o
REFRIGERANT BLEND WARNING:
This refrigerant analyzer is approved
for specific refrigerant testing and should not be used with substances
outside the scope of the device. Cross-contamination with other refrigerant
types causes severe damage to the A/C system, to service tools, and
equipment. Do NOT attempt to adapt the unit for another refrigerant. Do
NOT mix refrigerant types in a system or in the same container.
o
SAMPLE HOSE WARNING:
Replace the sample hose AS SOON AS
LIQUID, OIL OR RED SPOTS (DISCOLORATION) BEGIN TO APPEAR
ON THE INSIDE DIAMETER OF THE SAMPLE HOSE OR WHITE FILTER
ELEMENT. Failure to properly maintain and replace the sample hose will
result in severe damage or inaccurate results.
o
FLAMMABILITY WARNING:
Some systems may contain flammable
refrigerants such as hydrocarbons. Failure to follow the manual can result
in serious injury or death. Less than 2 grams of refrigerant are vented with
each sample. This analyzer is designed with sealed heat sources and
without sparking components.
o
SAMPLE INPUT WARNING:
DO NOT
attempt to introduce liquid or
samples heavily laden with oil into the vapor sampling hose configuration.
Damage caused to the instrument due to the use of the wrong hose
configuration on the wrong port will void the warranty!
o
BATTERY CHARGING WARNING:
When charging the internal battery with
the supplied power supply, the power supply may become warm. If the
power supply becomes warm, unplug the cord immediately! When
charging multiple analyzers, allow the charger to cool between each
battery.
o
AIR SENSOR WARNING:
The air detection sensor is a chemical fuel cell
sensor that will eventually expire. The user must return the unit to an
approved vendor in order to replace the air detection sensor whenever the
instrument indicates as such. Failure to replace the air detection sensor will
result in non-functionality of the instrument.
o
POWER SOURCE WARNING:
Connection to power sources greater than
13VDC could cause “out of warranty” damage.
o
OPPERATIONAL WARNING:
If the equipment is used in a manner not
specified by the manufacturer, the protection by the equipment may be
impaired.
